LS Swap Harness : Gen 5 (direct injection) 2014+ LT1 LT4 Engine Controller Kit

Category:

Please contact us directly to order as there are many additional options to choose.

Price starting at $1814.19

APPLICATION: Gen 5 (Direct injection) 2014 +  LT1, LT4, L83, L84, L86, L87 & L8T 5.3 / 6.2 / 6.6

*Don’t forget to mail in your customer supplied T43 TCM (located inside your 6L80e transmission). Here is a VIDEO to help with the removal and installation of the TCM.

PARTS INCLUDED: 
Complete engine and transmission wiring Harness, Engine ECM (PCM-2001, PCM-2003, PCM-2004, or PCM-2006), TCM (8 and 10 Speed only), Pedal (ACC-1007), o2 Sensors X2 (ACC-1039), MAF Sensor (ACC-1046), ECM Mounting Bracket (ACC-1050), 4″ LS3/LT1 Mass Airflow Tube/Holder (ACC-1201) and Instruction Manual.

TRANSMISSION COMPATIBILITY:

All 8 + 10 Speed TCM Tuning REQUIRE your TUN (Transmission unique number). Without the TUN from your transmission you may experience shifting issues, communication errors, no gear progression or other issues. Warranties can not be honored without this information.

6L80/90Es: Must be 2013+ model year transmissions to work with a Gen 5 LT system.

8L80/90Es: 2014-2018 gen 1 model years currently compatible. The gen 2 8 speeds (2019+) are currently NOT compatible.

10L80/90Es: All 2017-2018 Gen 1 10 speed transmissions are compatible. 2019-21 2wd Truck/SUV and all 19+ Gm Performance and Camaro  are compatible. 2022+ Gen 2 10 speed transmissions with the electronic transmission range select (ETRS) are NOT compatible. These ETRS transmissions will only have a “park” and “out of park” position on the external shift lever on the driver side of the transmission.

FANS: Fan control functionality is dependent on the operating system your ECM requires. Depending on your particular setup fan operation cannot be guaranteed using a relay system like KIT-1010. Fan control and operation can only be guaranteed if using PAC-2800BT.

NOTES: This COMPLETE controller kit from PSI includes everything you need to get that Gen 5 LT engine and 6L80E/90E, 8L90E, 10L90E or manual transmission running in your project vehicle. Why use an aftermarket controller for your transmission when you can utilize the Factory controller just like the original vehicle! The kit includes hardware and components that don’t typically come with used engines, such as the wiring harness, mass airflow meter, tube with MAF mount, pedal, oxygen sensors, and programmed ECM/TCM – eliminating the need to source them separately. This controller system is a true stand-alone system for use in older vehicles, as all that’s needed to get a vehicle running with it are power and ground sources, a fuel pump able to support 78-psi (540 kPa) at the fuel rail, and an electric cooling fan.

CONNECTIONS FOR:

  • Fuse/Relay Box
  • Fuel Pump Control (Relay included)
  • Fan controls (Fan controller PAC-2800BT and Relays sold separately KIT-1010)
  • Check Engine Light, Speedo output, Tachometer, OBD2 Port
  • Accelerator Pedal
  • Throttle Body
  • MAF Sensor
  • MAP Sensor
  • Engine Coolant Temp Sensor
  • Alternator Control
  • (2) Upstream Oxygen Sensors
  • Crankshaft Position
  • Camshaft Position
  • Fuel Injectors
  • Coil Packs
  • Automatic or Manual Transmission control
  • Knock Sensors

 

WARNING: The installed tune is a base/startup tune, mirroring a factory OEM tune based on the options selected in your order. The tune will remove the VATS (Vehicle Anti-Theft System), bypass VVT (if applicable), disable DOD (if applicable), and remove any restrictions preventing operation of the engine when installed in a different vehicle.

If the engine has a different camshaft, ANY performance modifications, or has any components that differ from options selected on your tune request the following issues may occur: No start, erratic idle, surging, check engine lights, limp mode, lack of shifting, no throttle response, poor power delivery, and other issues possibly rendering the engine inoperable. Any engine or transmission modifications will REQUIRE a custom tune to ensure proper operation and prevent serious damage. PSI Conversion cannot be held responsible for issues related to operation or performance when the engine/transmission has been modified, or varies from the options selected when the tune was installed.

These Harnesses are designed for retrofitting 2014+ LT1, L83, L84, L86, L87 & L8T ECOTEC3 GEN 5 5.3L, 6.2L, and 6.6L engines and a 4, 6, 8, or 10 speed or T56/TR6060/non-electronic automatic transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation.

Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications.

Reviews

There are no reviews yet.

Be the first to review “LS Swap Harness : Gen 5 (direct injection) 2014+ LT1 LT4 Engine Controller Kit”

Your email address will not be published. Required fields are marked *